Power Control System (Pcs); Solar Charge Panel - Winnebago GRANDTOUR 2017 Operator's Manual

Table of Contents

Advertisement

SECTION 4 –
APPLIANCES AND SYSTEMS
Generator Switch
(Located on "Home" Screen
Push and Hold for 10 seconds to turn on.
• White text indicates ON
Push and Hold for 3 seconds to turn off.
POWER CONTROL SYSTEM
(PCS)
The Power Control System (PCS) monitors
the electrical usage of the appliances and
equipment in the coach and allows you to use
certain high energy appliances, such as the
microwave or washer/dryer, without overloading
the shoreline or generator circuit breaker to
prevent nuisance tripping.
PCS Display Panel
(Located on touch tablet "Home" screen)
• Input Power (Volts)
• Power Consumption (Amps)
-If Equipped
4-8
Touch Tablet Main Menu
• Tap on "Utilities" (selection displays in white).
PCS Display Panel
(Located on touch tablet "Utilities" screen)
Tap to select shore power amp setting.
• The white arrow designates selection.
-If Equipped
Further Information
Refer to the manufacturer's user guide
provided in your InfoCase for important
information on how this system operates under
several conditions, whether 20-amp, 30-amp, or
50-amp connections.

SOLAR CHARGE PANEL

–If Equipped
The roof-mounted Solar Charge Panel uses
the sun to help keep your house batteries charged.
A Solar Charge Controller is located near the
monitor panel or in an exterior compartment
(depending on model) to show you when the
Solar Charge Panel is actively charging the house
batteries.
The solar charging system installed in your
coach has a maximum input rating of 510 Watts.
Every solar panel connected to the system needs
to be accounted for, this includes all roof
mounted panels and the ground level single solar
port.

Advertisement

Table of Contents
loading

Table of Contents