Table of Contents
Advertisement
SECTION 8 –
ENTERTAINMENT
Video Source from HDMI Matrix
The audio and video signal from the HDMI
matrix is received by the Yamaha sound bar and
then sent to the TV. Power on the sound bar and
TV in order to enjoy the desired video source
from the HDMI matrix.
•
Press HDMI 1 button on the sound bar remote.
•
Verify TV source is set to HDMI by pressing
source or input button on the TV remote.
•
Volume is controlled by the sound bar remote.
Video Source from TV (broadcast
or cable)
•
Press source or input button on TV remote and
select "Air" or "Cable".
•
Press "TV" button on sound bar
remote.
•
Volume is controlled by the sound bar remote.
Listen to Music stored on a
Bluetooth device
•
Press the Bluetooth button on the
sound bar remote.
•
On your Bluetooth device, perform the
pairing operation. A list of devices found will
appear on your device. Select the Sound Bar.
•
Enter the PIN code 0000 (if required).
•
When the devices are paired, the Sound Bar
will display the device name.
•
Turn the Sound Bar volume up or down.
Bedroom TV with Yamaha Sound
Bar System
•
Turn on TV and ensure TV source is set to
HDMI by pressing the source or input button
on the TV remote.
•
Turn on the sound bar and set the input to
optical.
•
Volume is controlled by the sound bar remote.
NOTE: TV will operate without using the sound
bar if desired.
Exterior TV with Sound Bar System
•
Turn on TV and ensure TV source is set to
HDMI by pressing the source or input button
on the TV remote.
8-6
•
Turn on the sound bar and set the input to
optical.
•
Volume is controlled by the sound bar remote.
NOTE: TV will operate without using the sound
bar if desired.
Turning TV Speakers On/Off
TV speakers can be turned off to prevent an
echo effect when using an external speaker
(sound bar). Every TV is slightly different, refer
to the TV manufacturer's user guide provided in
your InfoCase for detailed instructions on turning
TV speakers off.
Further Information
See the manufacturer's user guide provided in
your InfoCase for complete feature descriptions
and operating instructions.
INFOTAINMENT CENTER
(HOUSE MODE)
–If Equipped
The Infotainment Center in your coach allows
you to view, listen, and control various modes
®
such as SiriusXM
satellite radio or Navigation
from the dash radio to all TV's in your coach
while parked.
Basic Operating Instructions
•
Engage the parking brake.
•
On the Infotainment System, go to Main
Menu and select House Mode. This disables
the cab speakers and sends video and audio
source from the radio to AUX input (4) on the
HDMI matrix.
•
Use the dash radio remote control to operate
the dash radio from all the TV's in your coach.
Further Information
See the manufacturer's user guide provided in
your InfoCase for complete operating
instructions.
Advertisement
Table of Contents
