Add Policy - D-Link AC750 User Manual

Section 3 - Configuration
Click Next to begin the add policy wizard.
STEP 1: CHOOSE POLICY NAME
Policy Name : Enter a name for your policy.
Click Next to continue.
STEP 2: SELECT SCHEDULE
Details: Select a schedule from the drop-down menu. The default is Always.
Refer to Schedules on page 110 for more information on creating
new schedules.
Click Next to continue.
STEP 3: SELECT MACHINE
Address Type: Choose whether this policy is applied by IP or MAC address.
IP Address: If you select IP as the address type, enter the IP address of the device
you wish to apply the policy to or use the Computer Name dropdown
menu to quickly select a computer. The IP address is automatically
populated.
D-Link DIR-819 User Manual
ADD NEW POLICY

Add Policy

ADD NEW POLICY
This wizard will guide you through the following steps to add a new policy for Access Control.
Step 1 - Choose a unique name for your policy
Step 2 - Select a schedule
Step 3 - Select the machine to which this policy applies
Step 4 - Select filtering method
Step 5 - Select filters
Step 6 - Configure Web Access Logging
Prev Next Save
STEP 1: CHOOSE POLICY NAME
Choose a unique name for your policy.
Policy Name :
Prev Next Save
STEP 2: SELECT SCHEDULE
Choose a schedule to apply to this policy.
Always
▼
Details : Always
Prev Next Save
STEP 3: SELECT MACHINE
Select the machine to which this policy applies.
Specify a machine with its IP or MAC address.
Address Type : ž IP š MAC
IP Address :
Machine Addres :
Clone Your PC's MAC Address
Add Cancel
Machine
Prev Next Save
Cancel
Cancel
Cancel
<< Computer Name ▼
Computer Name ▼
<<
Cancel
88