D-Link AC750 User Manual page 72

Section 3 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE
My IPv6
Connection is: username and password in order to connect to the Internet.
PPPOE INTERNET CONNECTION TYPE :
PPPoE Session : Select whethe to Share with IPv4 or Create a new session.
Address Mode: Select either Dynamic IP or Static IP.
If you chose Share with IPv4 as the PPPoE Session with Static IP as the Address Mode,
enter your IP address:
IP Address: Enter the IP address provided by your ISP.
If you choose Create a new session as the PPPoE Session, fill in the following fields:
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Verify Password: Enter the password provided by your ISP one more time.
Service Name: Enter the ISP service name (optional).
Select either AlwaysOn or Manual.
Reconnect Mode:
Maximum Idle Set the length of time to wait before disconnecting if there is no
Time: Internet activity. (Manual Only)
MTU Size: Enter the MTU size.
D-Link DIR-819 User Manual
IPV6 CONNECTION TYPE
PPPoE
DIR-819
IPV6
IPV6
Use this section to configure your IPv6 Connection Type.If you are unsure of your connection method, please contact your Internet
Service Provider.
Save Settings
IPV6 CONNECTION TYPE
Choose the mode to be used by the router to connect to the IPv6 Internet.
PPPOE INTERNET CONNECTION TYPE :
Enter the information provided by your Internet Service Provider (ISP).
IPV6 DNS SETTINGS
Obtain DNS server address automatically or enter a specific DNS server address.
LAN IPV6 ADDRESS SETTINGS
Use this section to configure the internal network settings of your router. If you change the LAN IPv6 Address here, you may need to
adjust your PC network settings to access the network again.
ADDRESS AUTOCONFIGURATION SETTINGS
Use this section to setup IPv6 Autoconfiguration to assign IP addresses to the computers on your network. You can also enable DHCP-PD
to delegate prefixes for routers in your LAN.
Enable Automatic IPv6 address assignment :
SETUP
IPV6
Don't Save Settings
My IPv6 Connection is: PPPoE
PPPoE Session : ž Share with IPv4 š Create a new session
Address Mode : ž Dynamic IP š Static IP
IP Address :
User Name :
Password :
Verify Password :
Service Name : (optional)
Reconnect Mode : ž Always on š On Demand š Manual
Maximum Idle Time : (minutes, 0=infinite)
MTU : 1492 (byes) MTU default=1492
ž Obtain IPv6 DNS Servers automatically
š Use the following IPv6 DNS Servers
Primary DNS Address :
Secondary DNS Address :
☑
Enable DHCP-PD :
LAN IPv6 Address :
LAN IPv6 Link-Local Address : ffff::fff:ffff:ffff:1234 /64
☑
☑
Enable Automatic DHCP-PD in LAN :
Autoconfiguration Type : SLAAC+RDNSS
SLAAC+Stateless DHCP
Stateful DHCPv6
Router Advertisement Lifetime : (minutes)
▼
/64
▼
68