D-Link AC750 User Manual page 34

Section 3 - Configuration
If you choose Username / Password Connection (L2TP) as your Internet Connection, enter your IP address, configure the following settings:
SET USERNAME AND PASSWORD CONNECTION (L2TP)
Address Mode: Select either Dynamic IP or Static IP
If you choose Static IP as the Address Mode, enter your IP address:
L2TP IP Address: Enter the PPTP IP Address provided by your ISP.
L2TP Subnet Enter the PPTP Subnet mask provided by your ISP.
Mask:
L2TP Gateway IP Enter the PPTP Gateway IP Address provided by your ISP.
ddress:
If you choose Dynamic IP or Static IP as the Address Mode, enter your PPTP Server IP
address:
L2TP Server IP Enter the PPTP Server IP address provided by your ISP.
Address:
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Verify Password: Enter the password provided by your ISP one more time.
Primary DNS
Enter the primary DNS server IP addresses.
Server:
D-Link DIR-819 User Manual
Internet Connection Setup Wizard (continued)
DNS SETTINGS
L2TP
SET USERNAME AND PASSWORD CONNECTION (L2TP)
To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also
need L2TP IP address. If you do not have this information, please contact your ISP.
DNS SETTINGS
Address Mode : ž Dynamic IP š Static IP
L2TP IP Address :
L2TP Subnet Mask :
L2TP Gateway IP Address :
L2TP Server IP Address : (may be same as gateway)
User Name :
Password :
Verify Password :
Primary DNS Address :
Secondary DNS Address : (optional)
Prev Next Cancel Connect
30