D-Link AC750 User Manual page 81

Section 3 - Configuration
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
Address Autoconfiguration Settings
Enable Automatic
Enable or disable the Automatic IPv6 Address Assignment feature. If
IPv6 address you disable this option, no further configuration is available.
assignment:
Autoconfiguration Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
Type:
If you choose SLAAC+Stateless DHCP, please configure the following field:
Router Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
If you choose Stateful DHCPv6, please configure the following fields:
IPv6 Address Enter the starting IPv6 address for the DHCP server's IPv6 assignment.
Range(Start):
IPv6 Address Enter the ending IPv6 address for the DHCP server's IPv6 assignment.
Range(End):
Router Enter the IPv6 address lifetime (in seconds).
Advertisement
Lifetime:
When you have finished configuring your IPv6 connection, click the Save Settings button.
D-Link DIR-819 User Manual
6rd (continued)
LAN IPV6 ADDRESS SETTINGS
Use this section to configure the internal network settings of your router. If you change the LAN IPv6 Address here, you may need to
adjust your PC network settings to access the network again.
LAN IPv6 Address : XXXX:XXXX:XXXX:
LAN IPv6 Link-Local Address : ffff::fff:ffff:ffff:1234 /64
ADDRESS AUTOCONFIGURATION SETTINGS
Use this section to setup IPv6 Autoconfiguration to assign IP addresses to the computers on your network.
☑
Enable Automatic IPv6 address assignment :
Autoconfiguration Type : SLAAC+RDNSS
SLAAC+Stateless DHCP
Stateful DHCPv6
Router Advertisement Lifetime :
Save Settings Don't Save Settings
::1 /64
▼
(minutes)
77