Add Ip Filter; Port Forwarding - D-Link DWR-933 User Manual

Section 3 - Configuration
If you selected Add New IP Filter, you will see these options:

Add IP Filter

Policy Select whether the filter will Drop or Accept traffic
from the IP address.
Protocol
Select the protocol that you want to allow or deny
access to.
IP
Enter the IP address you want to filter.
Click Apply to save changes.

Port Forwarding

This page will allow you to open a single port or a range of ports to specific IP
addresses.
ID
ID number given to the new rule.
Delete
To delete a rule, click the checkbox next to it then click
the Apply button.
Protocol The selected protocol for the port forwarding rule.
Destination IP The local IP address that traffic for the selected port
will be forwarded to.
Port The port that incoming traffic will be forwarded
from.
Add New Click this button to add a new forwarding rule.
Click Apply to save changes.
D-Link DWR-933 User Manual 48