Connect A Wireless Client To Your Router; Wps Button - D-Link AC750 User Manual

Section 4 - Connecting to a Wireless Network

Connect a Wireless Client to Your Router

The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers, and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-819 router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DIR-819 for about 1 second. The wireless LED on the front will start to blink.
Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
Step 3 - Allow up to 1 minute for your connection to be configured. Once the WPS LED stops blinking, you will be connected
and your wireless connection will be secure with WPA2.
D-Link DIR-819 User Manual

WPS Button

WPS Button
122