D-Link AC750 User Manual page 55

Section 3 - Configuration
Channel Width Select Auto 20/40 if you are using both 802.11n and non-802.11n
(2.4 GHz): devices, or select 20 MHz if you are not using any 802.11n devices.
Channel Width Select Auto 20/40/80 if you are using 802.11ac, 802.11n, and 802.11a
(5 GHz): devices. Auto 20/40 select if you are using 802.11n and 802.11a
devices. 20 MHz if you are only using 802.11a devices. Higher channel
width allows for higher speeds.
The default setting is Visible. Select Invisible if you do not want to
Visibility Status:
broadcast the SSID of your wireless network.
Note: Making a network invisible is not a form of security alone.
WIRELESS SECURITY MODE
Refer to Wireless Security Mode on page 52 for more information on configuring your
wireless network's security.
D-Link DIR-819 User Manual
Manual Wireless Connection Setup (continued)
WIRELESS NETWORK SETTINGS
Wireless Band : 5GHz Band
☑
Enable Wireless : Always
Wireless Network Name : Your_5GHz_Network
802.11 Mode: 802.11a only
802.11n only
Mixed 802.11a and 802.11n
Mixed 802.11ac and 802.11n
Mixed 802.11ac, 802.11n and 802.11a
☑
Enable Auto Channel Scan :
Wireless Channel : 153
▼
Transmission Rate : Best (automatic)
Channel Width :
20 MHz
20/40 MHz(Auto)
20/40/80 MHz(Auto)
Visibility Status : ž Visible š Invisible
WIRELESS SECURITY MODE
Security Mode :
None
WEP
WPA-Personal
WPA-Enterprise
▼ New Schedule
▼
(Mbit/s)
▼
▼
▼
51