Before Getting Started - Wilson Electronics SIGNALBOOST MINI-AMP Installation Manual

Before Getting Started

This guide will help you properly install Wilson's SIGNALBOOST
Wireless Cellular/PCS Amplifi er. It is important to read through all of the installation
steps for your particular application prior to installing any equipment. Read through
the instructions, visualize where all the equipment will need to be installed and do a soft
installation before mounting any equipment. If you do not understand the instructions in full,
seek professional help, or contact Wilson Technical Support at 866-294-1660.
Installation Diagram
Inside Antenna
Ultra-slim
Inside
Antenna
Installation Diagram
Laptop Use
3
Amplifier Instructions - SBoostMSec1:3 Sec1:3 Amplifier Instructions - SBoostMSec1:3 Sec1:3
!
Outside
do not plug the amplifi er directly into the
Antenna
cell phone or data card using an antenna
adapter. It will damage the amplifi er.
DC Power
Supply
Amplifi er
!
Outside
directly into the laptop or data card using
Antenna
an antenna adapter. It will damage the
amplifi er.
Laptop with Ultra-
attached (see pg. 7)
DC Power
Supply
Amplifi er
TM Mini-Amp Dual-Band
Warning: In a wireless installation,
Cell Phone
PDA
Notebook
Warning: Do not plug the amplifi er
slim antenna
4/2/2008 9:16:49 AM 4/2/2008 9:16:49 AM