Dc Power Supply - Skyrc D100 Instruction Manual

DC Power Supply

To use D100v as a power supply, the user must connect it to AC power source. When
2
the green LED on the back side turns on, then the user is free to use the power supply,
the power of DC output is adjustable from 10W to 100W. The output voltage is 13.8V. The
power of DC output is shared with charger power. When you increase the power of DC
output, the charger power will be decreased accordingly. (DC Power + Channel
A+Channel B = 100 Watts)
Operating Instruction
BATT/PROGRAM
SYSTEM SETTING->
ENTER
DC SUPPLY: 20W
CHA: 50 CHB: 30W
ENTER
CH1: 50 CH2: 50W
DC SUPPLY: 150W
Caution: The maximum DC Power output is 100 Watts. Please check the total loading of
your equipments before using DC power supply.
If the DC power supply is over load, the led light will flash red and stop working.
Please scan and watch the tutorial video above using
DC power supply.
Video
Tutorial
· 24
Press the ENTER to enter the DC Power Supply program
Set the output power for the DC charger or other devices. (please
note the voltage is 13.8V)
Set the power of channel A and channel B, the power supply will
take the rest power
EXPLANATION OF LED STATUS
OFF
Green
Yellow
Red
Red Blinking
automatically.
DC Power Off
0-30% Loading
31-60% Loading
61-100% Loading
Over Load
D100v
2