Skyrc D100 Instruction Manual page 6

Special Features
Battery Memory (Data Store/Load)
The charger can store up to 10 different charge/discharge profiles for each channel. You can
keep the data pertaining to program setting of the battery of continuous charging or
discharging. Users can call out these data at any time without any special program setting.
Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. (for expert user only)
PC Control Software "Charge Master"
The free "Charge Master" software gives you unparalleled ability to operate the charger through
the computer. You can monitor pack voltage, cell voltage and other data during the charging,
view charge data in real-time graphs. And you can initiate, control the charger from "Charge
Master".
Smart Phone Control via Bluetooth (both iOS and Android)
The charger can be operated with a smart phone via bluetooth connection.
SCAN TO GO
A very unique feature of D100
of battery types and capacity becomes more and more, each battery requires its own dedicated
charging process. It is easy to set up the charger incorrectly for a specific type of battery,
resulting damage the battery or even cause accident.
The revolutionary SCAN TO GO provides a solution to this problem by allowing the user to
assign a QR Code which contains all the relevant data for the battery for charging or
discharging. The user can create a unique QR Code by using "SkyCharger" apps. Print it and
paste it on the battery.
Using your smart phone and launch "SkyCharger" app. Since all the essential information is
stored in the QR Code. All you need to do is press the Scan button, and the charge or
discharge process will start automatically.
Balancing Individual Cells Battery During Discharging
During the process of discharging, SKYRC D100
battery individually. Error message will be indicated and the process will be ended automatically
if the voltage of any single one cell is abnormal.
Fast Charge and Storage Mode of Lithium Battery
Function of the two modes differs from each other. "FAST CHG" minimizes battery charge
time, while "STORAGE" has the capacity to control the final battery voltage, which is
necessary and helpful for a rarely used battery.
Re-Peak Mode of NiMH/NiCd Battery
In re-peak charge mode, the charger can peak charge the battery once, twice or three
times in a row automatically. This is good for making the battery fully charged.
· 04
v
is SCAN TO GO (automatically charging system). As the range
2
v
can monitor and balance each cell of the
2
D100v
2