Skyrc D100 Instruction Manual page 36

Controlling the Charger Using the App
4). System Setting
Revo 15:53
CH. A CH. B
Battery Battery Operation
Type Cells Mode
2
3
LiPo 4 BAL.CHARGE
LiIon 5 CHARGER
LiFe 6 DISCHARGER
NEXT
SCAN TO GO
HOME PROGRAM
Enter into System Setting
5). SCAN TO GO
A very unique feature of D100v
the range of battery types and capacity becomes more and more, each battery
requires its own dedicated charging process. It is easy to set up the charger
incorrectly for a specific type of battery, resulting damage the battery or even cause
accident.
The revolutionary SCAN TO GO provides a solution to this problem by allowing the
user to assign a QR Code which contains all the relevant data for the battery for
charging or discharging. The user can create a unique QR Code by using
"SkyCharger" apps. Print it and paste it on the battery.
Using your smart phone and launch "SkyCharger" App. Since all the essential
information is stored in the QR Code. All you need to do is press the Scan button, and
the charge or discharge process will start automatically.
· 34
Revo
CH. A
Safety Timer
Capacity Cut-Off
Temperature Cut-Off
50
Rest Time Between Cycle
Charge
Discharge
DC Input Low Cut-Off
Balance Port Enable
SYSTEM HOME
is SCAN TO GO (automatically charging system). As
2
15:53
CH. B
120
Min
5000
mAh
122
C F
10
Min
11.0
V
PROGRAM SYSTEM
Revo 15:53
CH. A CH. B
Key Beep
Buzzer
Change Password
HOME PROGRAM
D100v
>
SYSTEM
2