Sharp MD-X7H Service Manual page 61

8. TEST-PLAY mode
Step No. Setting Method
Step 1 Testmode STOP state
Step 2 Press the CD
Step 3 Press once the CD STOP button. ADRES setting (Target address initial value is indicated)
Press once the MD PLAY button. While searching, set the search output to "H". To start continuous play,
Step 4 Continuous playback (pit section) (Address + C1 error indication)
Continuous playback (groove section) (Address + C1 error indication)
Step 5 Press once the CD STOP button. (Address + ADIP error indication)
Continuous playback (groove section)
Step 6 Press once the MD STOP button. TEST-PLAY menu
• If the MD STOP button is pressed while the TEST-PLAY menu is displayed, TEST mode STOP state is set.
• If the MD PLAY button is pressed while the TEST-PLAY menu is displayed, continuous playback is started from the current pickup position.
• Whenever the CD MD EDIT button is pressed in the address setting mode, the address changes as follows.
0 0 5 0 → 0 3 C 0 → 0 7 0 0 → 0 8 A 0 → 0 0 5 0 → ............
• Whenever the CD STOP button is pressed in the address setting mode, the digit which is changed with -
0 0 5 0 → 0 0 5 0 → 0 0 5 0 → 0 0 5 0 → ............
• The digit of address which has been specified with -
* If the - / + button is held down, the setting changes continuously with 100 ms cycle.
• If the TRACK EDIT button is pressed in the continuous playback mode, the number of jump lines changes as follows.
1 line → 10 line → 400 line → 1 line → ............
* After the number of jump lines is indicated for one second, the address indication is restored.
• If the - / + button is pressed in the continuous playback mode, the specified number of lines is jumped in the
direction.
* If the - / + button is held down, the setting changes with 100 ms cycle.
• Whenever the CD STOP button is pressed in the continuous playback mode, the indication changes as follows.
* Pit section Continuous playback (SUBQ address indication + C1 error indication) remains.
* Groove section Continuous playback (ADIP address indication + C1 error indication) remains.
Continuous playback (ADIP address indication + ADIP error indication) remains.
Continuous playback (ADIP address indication + C1 error indication) remains.
• : Adress,
9. TEST-REC mode
Setting Method
Step No.
Step 1 Testmode STOP state
Step 2 Press the CD
Step 3 Press once the CD STOP button. ADRES setting (indication of address initial value)
Step 4 Press once the MD PLAY button. While searching, set the search output to "H". To start continuous play,
Step 5 Press once the MD STOP button. TEST-REC menu
• If the MD STOP button is pressed while the TEST-PLAY menu is displayed, TEST mode STOP state is set.
• If the MD PLAY button is pressed while the TEST-REC menu is displayed, continuous record is started from the current pickup position.
• Whenever the CD MD EDIT button is pressed in the address setting mode, the address changes as follows.
0 0 5 0 → 0 3 C 0 → 0 7 0 0 → 0 8 A 0 → 0 0 5 0 → ............
• Whenever the CD STOP button is pressed in the address setting mode, the digit which is changed with -
0 0 5 0 → 0 0 5 0 → 0 0 5 0 → 0 0 5 0 → ............
• The digit of address which has been specified with -
* If the - / + button is held down, the setting changes continuously with 100 ms cycle.
• If the VOL UP/VOL DOWN button is pressed in TEST-REC mode and continuous record mode, the laser record power changes.
(Servo gain changes also according to the record power.)
• : Adress, : Laser power cord
10. INNER mode
Step No. Setting Method
Step 1 Testmode STOP state
Step 2 Press the TRACK EDIT button.
Step 3 Press once the MD PLAY button. INNER switch position measurement
Step 4 Press once the MD STOP button. INNER menu
• : Adress
• Press the MD STOP button while the INNER menu is displayed, to shift to the TEST mode STOP state.
MD EDIT button. TEST-PLAY menu
return it to "L".
: Error late, : Jump lines
MD EDIT button. TEST-REC menu
return it to "L".
Continuous recording
INNER menu
(SUBQ address and C1 error are also indicated.)
Remarks
/ + and CD STOP button in the address setting mode is set to +01H/-01H.(0~F)
↓
↓
↓
Remarks
/ + and CD STOP button in the address setting mode is set to +01H/-01H.(0~F)
Remarks
– 25 –
MD-X8H
Display
[ t s m
[ T E S T _ P L A Y _ ]
[ A D R E S _ 0 0 5 0 ]
[s c
[a c
[a a
[ T E S T _ P L A Y _ ]
/ + changes as follows.
[ T R _ J U M P ]
[s c
[a c
[a a
[a c
Display
[ t s m
[ T E S T _ R E C _ _ ]
[ a 0 0 5 0 _ p w
[ a p w
[ T E S T _ R E C _ _ ]
/ + changes as follows.
Display
[ t s m
[ _ _ I N N E R _ _ ]
[s c
[ _ _ I N N E R _ _ ]
e ]
]
]
]
FWD/REV
]
]
]
]
e ]
]
]
e ]
]