Live Application Remote Control; Set Up Procedure; Before Starting The Set Up Process; Automatic Setup Instruction - Whirlpool SPIW409A2WF Instructions For Use Manual

LIVE APPLICATION REMOTE CONTROL /

SET UP PROCEDURE

The LIVE feature allows to operate and supervise the air conditioner remotely by external device. To
enable the appliance to be remotely controlled, you first have to complete successfully the connectivity set
up process. This process is necessary to register your air conditioner and connect to your home network.
The set up procedure has to be carried out only once. You have to carry it out again if you change your
router set up properties (network name or password or data provider).

BEFORE STARTING THE SET UP PROCESS

1. To use this feature You need to own:
• a smart phone running Android 4.3 (or higher) with a 1280x720 (or higher) screen or a tablet or a
smart phone running iOS 8 (or higher);
• a wireless router 2.4Ghz WiFi b/g/n connected to internet (verify with your smart device that the
signal strength of your home wireless network close to the appliance is good).
2. Download & Install the free application: LIVE on your Android smart-phone or iPAD/iPhone from the
store. The App will guide you, step by step, through the installation process.
3. If You do not have an account already, create one and subscribe to service by accepting the legal terms
to be able to benefit the features provided through the app.
4. Register your air conditioner following the App instructions. For the registration process You will need
the Smart Appliance IDentifier (SAID) number, available on a sticker on the air conditioner. The SAID
is composed by 13 numbers and letters. You can take a note of your appliance SAID here:
SAID ... ... ... ... ... ... ... ... ... ... ... ... ...
• Before starting the installation process turn on your router and verify that the wireless signal of your
home router is reaching the appliance. To verify the Wifi strength signal use a Tablet or Smart-phone
connected only to the Wi-Fi router, disable any other data connections, and place the device close to
the appliance. Open any internet web page in a browser and check that it is downloaded fast correctly.
If the internet connection of your home is working correctly but the page is not downloaded, you may
need to install a Wi-Fi extender device (not provided with the appliance).
• If your router supports WPS 2.0 (or greater ), follow the automatic set up procedure to connect your
appliance to router. If your router is not supported by WPS, follow the manual setup procedure.
Follow the instructions of your 6th Sense Live application on your smartphone to connect the appliance
to your wifi network. Otherwise read the next paragraphs for automatic or manual connection.
AUTOMATIC SETUP INSTRUCTION (first time use) – WPS method
This procedure is applicable only if your router supports WPS2.0 (or greater)
1. On your remote control: • press the WiFi button, wait a few seconds and then, press Hum%+ and
Hum%- buttons simultaneously for 3 seconds: this activates the provisioning process. The appliance is
being set to a "search" mode for a local network. • The Connectivity icon on the air conditioner
starts blinking fast.
2. On wireless router press the WPS button to establish a connection between the two products. An
indicator light on your router will begin blinking.
3. When the appliance successfully connects to the local router, the wifi icon switches to slow blinking.
This may take few minutes.
4. The appliance tries to connect to Backend system. Connectivity button becomes steady.
If the wifi icon does not stop blinking after few minutes, then the air conditioner has failed to find the
connections to home network using WPS. Try the procedure again and if not successful, than use the
MANUAL SETUP INSTRUCTION.
MANUAL SETUP INSTRUCTION (first time use) - uAccess Point method
This procedure uses the Micro Access Point technology and is applicable if Your router does not support WPS
1. Before starting the setup procedure please take note of the home wireless network name (SSID), its
PASSWORD, and the SAID of air conditioner. They will be required during the installation process.
2. Turn ON your router and make sure the Internet connections is working.
62