Wireless Remote Control; Display Panel - Whirlpool AMD 385 Instructions For Use Manual

REMOTE CONTROL
WIRE REMOTE CONTROL
SET TEMP
ROOM T EMP
A
Wire remote control is used for controlling
indoor embedded unit directly
Emergency switch
The filter clean is resetted
if press the switch.
Defrost indicator
It lights on during the
defrost.
It lights off when
defrost finishes.
Wire remote control is optional and it can be bought separately as an accessory.
For details please contact your dealer / technician.
C
AUT O
N O .
T IMER O N
T IMER O FF S E T T IME R

DISPLAY PANEL

Filter clean
It lights on when the
filter should be
cleaned.
6

WIRELESS REMOTE CONTROL

Remote control is used for
controlling embedded display
panel and wire remote control
Signal receiving
section
Receives signal from the
remote control.
Timer indicator
It lights on when timer
is in use.
It lights off when timer
finishes.