Remote Control - Whirlpool AMD 061 Instructions For Use Manual

REMOTE CONTROL

The remote control transmits signals to the system.
A. ON/OFF button
Press this button to start the appliance when it is connected to the
power supply or to stop it when the appliance is running.
B. MODE button
Used to select the operation mode.
C. SWING button
Used to adjust the direction of air flow.
D. 6th Sense button
To enable fuzzy logic function when the unit is either on or off.
E. button
To display temperature in either °C or °F
F. LOCK BUTTON
To enable or disable buttons on remote control.
G. CLOCK BUTTON
To view or set time.
H. TIMER OFF button
To set or cancel Timer Off function.
I. TIMER ON button
To set or cancel Timer On function.
J. ROOM TEMPERATURE SETTING buttons
To select room temperature.
To adjust real time or set time.
K. JET button
To start or stop fast cooling.
L. FAN button
To select auto, high or low fan speed.
Indication symbols on LCD:
Signal transmit
6th Sense indicator
Cooling indicator
Dry indicator
NOTE: Each mode and relevant function is described in the following pages.
24
Fan only indicator
Lock indicator
Heating indicator
Jet control indicator
Fan speed indicator
Display set temperature
K
L
I
H
G
J
Timer On or Timer Off
indicator
Display real time
B
D
A
C
E
F