Starting A Program - Simpson SWT8043 User Manual

22
SETTING A PROGRAM
5.6
Turn the program selector to
the required program.
-
Your washing machine is
now in STAND-BY-MODE
and ready to wash your
clothes.
- Press the ON/OFF button
(SWT1023A)
-
The relevant light will light up.
-
The buzzer will sound.
-
The selector dial can be
turned either clockwise or
anticlockwise.
-
Once you selected a
program, the program
selected will stay at that
position for the whole of the
cycle.
-
The display shows the
program duration.
If the settings shown on the
control panel are what you
want to use, press the
Start/Pause button to start
your wash.
If you want your laundry to be
washed with functions different
from the one proposed by the
machine, press Temperature,
Water Level, Spin Time and
Rinse Option buttons.
NOTE:
Different functions can be
combined which is dependent
on the program selected.
When these buttons are
pressed, the corresponding
pilot lights come on.
If you want to define the end of
the washing program , press
the "Delay End" button
repeatedly to choose your
machine end time.

STARTING A PROGRAM

5.7
To start a program, press the
Start/Pause button, a default
program duration will be displayed
on the screen.
NOTE
When you select the Drain+Spin
program, there will be a delay of
at least 2 minutes before the
washing machine starts to spin.
This delay is a pump out (Drain)
period to ensure the bowl is
empty of water, which is neces-
sary before spin commences.
Even though you may have only
put wet clothes into an empty
bowl, the delay before spin will
still occur to be safe and to
protect your washing machine.