Choose The Wash Program - Simpson Washing Machine User Manual

START YOUR WASHING MACHINE AS FOLLOWS

CHOOSE THE WASH PROGRAM

If you do move the Program Selector Knob the effect will be different depending on the status of the machine
at the time you do this, as follows:
1. When the machine is in pause mode, moving the Knob to a new position will result in the machine resetting
to the start of the new program.
(For pause mode, see "Machine in pause mode" page 11)
2. When the machine is running, moving the Knob to a new position will result in the machine continuing the
wash but the behaviour of the remainder of the wash changing to match the new program setting.
(For machine running, see "Wash cycle in progress" page 11)
NOTE:
When you choose the WOOLLENS or DRIP DRY program, the DEEP RINSE option is automatically
selected for you. You will not be able to select and use Eco Rinse with these two programs.
When you select the DRAIN & SPIN program, there will be a delay of approximately 5 minutes before
the washing machine starts to spin. This delay is a pump out (DRAIN) period to ensure the bowl is empty
of water, which is necessary before spin commences. Even though you may have only put wet clothes into
an empty bowl, the delay before spin will still occur to be safe and to protect your washing machine.
1. Turn on the taps
2. Close the lid
3. Press the POWER button
The machine will 'beep' twice and show a pattern of lights. Wait for this
to happen before attempting to operate the machine.
Your washing machine is now in pause mode and ready to wash your clothes.
If the settings shown on the control panel are what you want to use and
the PROGRAM SELECTOR is set to the correct wash program for your clothes
load, press the START/PAUSE button to start your wash.
To select a different program or change other settings, read the following
instructions in this section and in Section C.
Turn the PROGRAM SELECTOR knob to choose the wash program you want.
The table "YOUR PROGRAM GUIDE" shown on page 9 will help you in
selecting the right program.
The Program Selector knob is not a timer.
Once you select a wash program, the Program Selector knob will stay
at that position for the whole wash cycle.
You can turn the Program Selector Knob to a new program position at any time.
8