Simpson SWT8043 User Manual page 32

32
OTHER DIAGNOSTIC HELP AND A GUIDE FOR
WHEN YOU SHOULD CALL FOR SERVICE
If you are having a problem with your washing machine, make sure you have followed
ALL of the instructions on page 31 in the "What to do" column before calling for service.
Description
Not filling with
water.
Flood.
Draining problem.
Loss of water,
while washing.
Water level
problem.
Motor fault.
Lid can't lock
/ can't unlock
* This product has auto load sensing feature to select optimum amout of water to
suit the cloth load which might seem lower than conventional machine. This is
normal condition.
Display Code
Customer action (Summary)
Make sure both wall taps are on and hose filters are
not blocked.
Raise drain hose if water is flowing out of drain hose.
Press Start/Hold To Pause to re-start wash.
If problem remains, call Service.
If the water is pouring onto the floor, turn OFF both
wall taps.
Wait a few minutes to see if the fault is corrected.If
not, call Service.
Wait a few minutes to see if the fault is corrected.
If not, press the Start/Hold To Pause touchpad and
hold it for 1.2 second to enter pause mode then
check the drain hose for blockage.
Press Start/Hold To Pause to continue the wash.
If problem remains, call Service.
If water level in wash bowl is low and water is flooding
the floor, turn Program Selector Knob to Drain & Spin
position, then press Start/Hold To Pause.
Should this make things worse, press the power
button off (some models) and call Service.
Otherwise, press Start/Hold To Pause to continue the
wash.
Wait, this fault may clear itself.
If not, turn Program Selector Knob to Drain & Spin
position, then press Start/Hold To Pause to drain the
wash bowl.
If this problem is repeated, call Service.
Wait, this fault may clear itself.
If not, turn Program Selector Knob to Drain & Spin
position to drain the wash bowl.
If this problem is repeated, call Service.
If this problem is repeated, call Service.