Bluetooth Operation - Jensen SMPS-900 User Manual

WARNING
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
This product contains a coin/button cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does
not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
Pairing to a Device and Playing Audio
1. Press the POWER Switch (#21) to turn the unit ON.
2. Press the SOURCE Button (#10) repeatedly to select Bluetooth mode.
The Bluetooth
3. Press and hold the PAIR Button (#16), and the SMPS-900 will enter pairing
Mode. The Bluetooth indicator (#9) will begin flashing.
4. Turn on the Bluetooth function of your device and enable the search or scan
feature to find the SMPS-900. (see your device's instructions to add or setup a
Bluetooth device). Select "SMPS-900" from the device list when it appears on
your device screen. If required, enter the pass code "0000" to pair (link)
SMPS-900 with your device.
Refer to the user's manual for your specific device for instructions on pairing
and connecting Bluetooth devices.
5. If you are pairing (linking) your computer to the speaker using Bluetooth, you
may need to set the SMPS-900 as your computer's default sound device.
6. When successfully paired, the Bluetooth indicator
audible chime will sound through the speaker.
7. If you want SMPS-900 change to pair with another Bluetooth Enable Device.
Repeat steps 3 to 4.
PLAYING FROM A BLUETOOTH DEVICE
You can wirelessly play music from your Bluetooth device to SMPS-900 after
successfully pairing.
1. Select a song to play on your device and press the PLAY button, or press the
PLAY Button (#16) on the SMPS-900 to play or pause the playback.
2. Slowly adjust both the VOLUME Control (#19) on the SMPS-900 and your
Bluetooth device until you reach a comfortable listening level.
Notes:
• Your Bluetooth enabled device will not play the music through the SMPS-900,
even if connected (linked), if the device does not support the A2DP Bluetooth
profile.
• Remember to turn off the SMPS-900 when you have finished listening.
• Don't forget to switch off the power of your external audio device as well.

BLUETOOTH OPERATION

indicator (#9) will light up.
will light steadily
E-8
and an