Jensen SP1790JK User Manual

Jensen SP1790JK User Manual

900mhz wireless indoor/outdoor speakers

Advertisement

SP1790JK
900MHz Wireless Indoor/Outdoor Speakers

User Manual

INTRODUCTION
This 900 MHz digital hybrid wireless speaker system uses the latest wireless
technology that enables you to enjoy music and TV sound anywhere inside or
outside your home. You simply connect the system to any audio source such as
Radio, TV, VCR, Hi-Fi, and CD/MP3/VCD/DVD/Blu-Ray player. Without any
complicated wiring and installation, this system enables you to enjoy incredible
bona fide sound in minutes.
FEATURES
1. Weatherproof indoor and outdoor speakers
2. Automatic Phase Lock Loop (PLL) scanning system on speaker receivers
3. Phase Lock Loop (PLL) transmission system on transmitter
4. 900 MHz Digital Hybrid RF technology speaker system
5. Operating distance up to 150 feet
6. Virtually interference free audio quality
7. Standby Mode
8. Wireless remote control unit: Independently controls each speaker
A. Volume up/down
B. Power Off
9. Wall mountable using included mounting gaps on back of
10. 2-way speakers
IMPORTANT SAFETY INFORMATION
1. Read and follow all instructions and warnings.
2. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. If
necessary use a mild soap.
Page 1
speakers.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP1790JK and is the answer not in the manual?

Questions and answers

Summary of Contents for Jensen SP1790JK

  • Page 1: User Manual

    This 900 MHz digital hybrid wireless speaker system uses the latest wireless technology that enables you to enjoy music and TV sound anywhere inside or SP1790JK outside your home. You simply connect the system to any audio source such as 900MHz Wireless Indoor/Outdoor Speakers Radio, TV, VCR, Hi-Fi, and CD/MP3/VCD/DVD/Blu-Ray player.
  • Page 2: Remote Control

    COMPONENT IDENTIFICATION INSTALLATION INSTRUCTIONS TRANSMITTER TRANSMITTER 1. Insert the antenna tube onto the antenna wire. 2. Connect the supplied AC power adapter to an electrical wall outlet. SPEAKER RECEIVERS 3. Plug the AC power adapter into the DC input jack located on the rear of the transmitter.
  • Page 3: Operation

    CONNECTING TO MEDIA DEVICE The rear of the transmitter has one audio cord that can be connected properly to the audio output jack of TV, Computer, VCR, Radio, CD/MP3/VCD/DVD/Blu- Ray players or to headphone/earphone jack with the connector provided. 4. Press On/Off button located on each speaker and turn the speakers ON. The POWER LED will light up in Blue.
  • Page 4 NOTE: 6. To put unit in Standby Mode: Press the “AUTO TUNE” button for the best reception. Should you experience To protect the transmitter and save power, the transmitter will turn any frequency interference, move your channel switch from one channel to the off automatically if it detects that the unit is not being operated or, other channel (there are two channels for selection) on the transmitter, and then there is weak reception from the signal audio source, for 5 minutes.
  • Page 5: Technical Specifications

    TROUBLE SHOOTING TECHNICAL SPECIFICATIONS NO SOUND Transmission Mode : UHF Ensure the AC/DC adapter is fully inserted into the wall outlet and the Carrier Frequency : 900 MHZ Digital Hybrid jack located on the transmitter. Operation Voltage : Transmitter, DC 12V 150mA Ensure the speakers are switched on and Blue LED light is visible.
  • Page 6: Battery Notice

    BATTERY NOTICE: Do not mix old and new batteries. Do not mix alkaline standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. Replace all batteries at same time when they appear to be worn and unit is not operating properly. Remove batteries when unit is not used for long periods of time. To avoid leakage or explosion, do not put batteries in fire.

Table of Contents

Save PDF