Table of Contents
Advertisement
BLUETOOTH OPERATION
Slide the Power ON/OFF switch to ON position to turn ON the unit and follow the
directions below to connect via Bluetooth.
CONNECTING YOUR BLUETOOTH DEVICE USING NFC
ABOUT NFC
NFC (Near Field Communication) is a technology enabling short-range wireless
communication between various devices, such as mobile phones and IC tags Thanks
to the NFC function, data communication can be achieved easily just by touching the
relevant symbol or designated location on NFC compatible devices.
1.
Make sure your Smartphone or Bluetooth device has the NFC feature, and it is
turned ON (enabled).
2.
Turn on SMPS-627 power and wait for 20 seconds to enter pairing mode,
Bluetooth pairing MODE indicator flash fast.
Note : If the SMPS-627 is connected to other smartphone, press and hold the
Bluetooth button for 5 seconds to enter Bluetooth paring mode.
3.
Touch the back of your smartphone to the NFC linking point (#8) located on the
top panel of the unit (under the handle). Check the owner's manual of your
Bluetooth device to locate the NFC touch point if you are not sure where it is.
4.
If the SMPS-627 is in pairing mode, it will turn on and enter Bluetooth mode
automatically and pair with your smartphone.
5.
Some smartphones may ask you to confirm the pairing if they are not paired
before.
NOTE: If you have multiple NFC compatible devices to link, just touch the smartphone
to a different device to switch the connection to that device. For example, when your
smartphone is connected to the SMPS-627, just touch the linked smartphone to the
system to disconnect it and then touch another smartphone you want to change the
Bluetooth connection to (one touch connection switching). The connection will
automatically be transferred from your smartphone to the new device.
PAIRING (Linking) a BLUETOOTH ENABLED cell phone OR OTHER BLUETOOTH
ENABLED DEVICE to the SMPS-627
If the SMPS-627 has never been paired with a Bluetooth device before. You need to
follow the pairing instructions below to link the SMPS-627 with your Bluetooth device.
1.
Wait 20 seconds after the power switch is turned on, the Blue MODE LED on the
top panel will be flashing fast. The SMPS-627 is ready to pair (link) with your
Bluetooth device.
2.
Turn on the Bluetooth feature of your cell phone and enable the search or scan
feature to find the SMPS-627.
3.
Select "SMPS-627" from the device list when it appears on your screen. If
required, enter the pass code "0000" to pair (link) the SMPS-627 with your cell
phone. A tone will be heard if paring succesful and blue LED
flashing slow.
4.
After successfully pairing (linking) your cellphone with the SMPS-627, the
9
will begin
Advertisement
Table of Contents
