Related Manuals for Jensen SMPS-625
Summary of Contents for Jensen SMPS-625
- Page 1 BLUETOOTH WIRELESS STEREO SPEAKER USER MANUAL SMPS-625 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS SPEAKER AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
-
Page 2: Dear Jensen® Customer
The serial number of this product is found on its back cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: SMPS-625 Serial Number: COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. -
Page 3: Protect Your Furniture
'feet' before you place the product on fine wooden furniture. PRODUCT FEATURES The SMPS-625 is a Bluetooth portable stereo speaker with the following features: Wireless playback of music from your Bluetooth enabled device via the Bluetooth connection. -
Page 4: Charging Instructions
6. SPEAKERS 7. POWER OFF/BLUETOOTH AND AUX SWITCH 8. CHARGING JACK (mini USB jack) 9. POWER/CHARING INDICATOR 10. AUX-IN JACK 11. BATTERY COMPARTMENT DOOR 12. BATTERY COMPARTMENT CHARGING INSTRUCTIONS This unit operates on a rechargeable Li-ion battery (included). Open the Battery Compartment Door. - Page 5 turns green, the unit is fully charged. Unplug the USB cable from the power source once the battery is fully charged. RECHARGING THE BATTERY After prolonged use, the battery will be weak and operation may become intermittent. When this occurs you need to recharge the battery as soon as possible. Plug the unit into a USB port on your computer or into a DC 5V, 500mA and up, USB power adaptor (not included) using the included USB cable.
-
Page 6: Operating The Unit
If required, enter the pass code “0000” to pair (link) the SMPS-625 with your device. 3. After turning on the SMPS-625, a beep is heard and the unit will search for the last paired device. The BLUETOOTH STATUS INDICATOR will flash blue. If the speaker finds the paired Bluetooth device, a beep is heard and the BLUETOOTH STATUS INDICATOR will stop flashing and remain lit (blue). - Page 7 3.5 mm stereo plug on each end of the cable. 2. Plug one end into the AUX-IN jack on the SMPS-625 and the other end of the cable into the Line-out Jack or Headphone Jack of your external audio device.
-
Page 8: Care And Maintenance
Make sure your computer power is turned on functioning. and try another USB port. The SMPS-625 battery is Recharge the SMPS-625 battery. dead. The SMPS-625 is not linked Go through “Operating the Unit” process to with the Bluetooth enabled link the speaker. device. No Sound... -
Page 9: Specifications
setting. Unit gets warm after extended Turn the speaker off for a period of time or This is normal. play at high lower the volume. volume. SPECIFICATIONS Power Requirement Main unit DC 3.7V 800mAh rechargeable Li-ion Battery At Spectra, environmental and social responsibility is a core value of our business. - Page 10 IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $25.00 to cover the cost of repair, handling and return postage. All out of warranty returns must be sent prepaid. It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at custserv@spectraintl.com for updated information on the unit requiring service.