Related Manuals for Jensen SMPS-627
Summary of Contents for Jensen SMPS-627
-
Page 1: User Manual
PORTABLE BLUETOOTH WIRELESS STEREO SPEAKER USER MANUAL SMPS-627 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. -
Page 2: Dear Jensen® Customer
The serial number of this product is found on its bottom cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: SMPS-627 Serial Number:... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. -
Page 4: Compliance With Fcc Regulations
IMPORTANT NOTES Avoid installing the unit in locations described below: Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. Dusty, humid or moist places. Places subject to constant vibration. COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that... -
Page 5: Product Features
PRODUCT FEATURES The SMPS-627 is a Bluetooth portable stereo speaker with the following features: Auxiliary input jack to play music from your iPod or digital audio player Wireless playback of music from your cell phone via the Bluetooth connection Up to 33 feet (10 meters) operating range... -
Page 6: Location Of Controls
LOCATION OF CONTROLS Speakers Built In Microphone Bluetooth Paring , PLAY/PAUSE Button Power On/Bluetooth/AUX MODE Indicator Phone Hands-Free Button VOLUME UP /Down Button Battery Charging Indicator NFC linking Point... -
Page 7: Button Definitions
Handle Micro USB DC IN Port LINE IN Jack POWER ON/OFF Switch LED Status Indicators Discription LED Position LED Status Power/MODE Indicator No Power LED Off Bluetooth Mode Power on/Ready to link Blue LED flashing fast Power on/Bluetooth Blue LED flashing slow Connected Power on/Playback Blue LED lights steadily... -
Page 8: Power Source
CHARGING THE BATTERY USING THE micro USB PORT Charge the built-in Li-Polymer battery a minimum of 4 hours prior to first use. Use the included USB charging cord, and plug the SMPS-627 into a USB port on your computer or into a USB power adaptor (not included). - Page 9 2. After prolonged use, the battery voltage will discharge and operation might become intermittent. When this happens, please recharge the internal battery. Note: 1.) Charging time will vary if you are listening to music while charging the speaker battery. We recommend you turn off the speaker power during the charging process or until the speaker batteries are fully charged.
-
Page 10: Bluetooth Operation
(under the handle). Check the owner’s manual of your Bluetooth device to locate the NFC touch point if you are not sure where it is. If the SMPS-627 is in pairing mode, it will turn on and enter Bluetooth mode automatically and pair with your smartphone. - Page 11 1.) Refer to manual of your cell phones, iPad, computer or other Bluetooth enabled device for Bluetooth operation, since it may vary from model to model. 2.) SMPS-627 will be off if pairing is unsuccessful within 15 minutes to save battery power, blue LED turns off.
- Page 12 Re-linking to the cell phone If your cell phone is already paired with the SMPS-627, but became unlinked even with both Bluetooth devices turned on. You can re-link them by: Turn the unit Power off and then turn it on again, wait for 20 seconds, the blue...
-
Page 13: Auxiliary Input
MODE LED will change to flashing slow and a short tone will be heard if the SMPS-627 and your cell phone have been re-linked successfully. You can also re-link the SMPS-627 by using Bluetooth operation of your cell phone. Please refer to operation manual of your cell phone for more information. -
Page 14: Troubleshooting Guide
USB cable (included) into the micro USB or the USB cable jack on the SMPS-627 (included) is not plugged into the micro USB jack Charging on the SMPS-627... -
Page 15: Specifications
If you are using an external sound source like older generation of iPod, try reducing the output volume on the device itself. Also try turning bass boost OFF or change the EQ setting. Unit gets warm after Turn the unit off for a period of time extended This is normal.