Aux In Operation - Jensen JTA-315 User Manual

1. Rotate the FUNCTION SELECTOR (#13) to select the
2. Rotate the POWER/VOLUME CONTROL (#12) clockwise to turn the
unit ON. A click sound will be heard and the POWER/FUNCTION
INDICATOR (#10) will light "blue" and begin to flash.
3. Turn on the Bluetooth feature of your Bluetooth device and enable the
search or scan function to find the "JTA-315" under the available
device list.
4. Select "JTA-315" from the device list when it appears on your device's screen. If required, enter
the pass code "0000" to pair (link) the "JTA-315" with your device.
5. Once connected, the POWER/FUNCTION INDICATOR (#10) will stop flashing and remain lit
"blue".
6. You are now connected to your external Bluetooth device.
7. Rotate the POWER/VOLUME CONTROL (#12) and/or the volume control on your Bluetooth
device to adjust the sound level.
Notes:
1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled devices
for correct Bluetooth operation since it may vary from model to model.
2. If your Bluetooth enabled device does not support A2DP profile, it will not play the music through
the speaker, even if correctly paired (linked).
3. Remember to turn OFF the JTA-315 system when you have finished listening.
The JTA-315 system provides an AUX IN JACK (#14) for connecting external audio devices like MP3
players, CD players, smart phones and iPods (except iPod shuffle 3rd
generation) to listen to your external source through the speakers of this
system.
1. You need an audio cable (not included) with one 3.5 mm stereo
plug on each end of the cable.
2. Plug one end of the cable into the AUX IN JACK (#14) located on
the rear panel of the unit and the other end of the cable into the
Line-out Jack or Headphone Jack of your external audio device.
3. Turn on the external audio device.
4. Rotate the FUNCTION SELECTOR (#13) to select the AUX IN mode.
5. Rotate the POWER/VOLUME CONTROL (#12) clockwise to turn the unit ON. A click sound will
be heard and the POWER/FUNCTION INDICATOR (#10) will light "purple".
6. Use the POWER/VOLUME CONTROL (#12) on the unit to adjust the output volume.
7. Operate all other functions on the external device as usual.
Notes:
•
If you connect the Line-out Jack on your external device then you only need to adjust the volume
control of this system. If you connect the Headphone Jack of your external device then you may
need to adjust both the volume control of your external device and the volume control of this
system to find the most desirable volume setting.
•
Rotate the POWER/VOLUME CONTROL (#12) counter-clockwise until you hear a "click" sound to
turn OFF the system when you have finished listening. Don't forget to switch OFF the power of
your external device as well.

AUX IN OPERATION

E-8
IN mode.