Subscribe to Our Youtube Channel
Related Manuals for Jensen SMPS-640
Summary of Contents for Jensen SMPS-640
-
Page 1: User Manual
Bluetooth Wireless Shower Speaker USER MANUAL SMPS-640 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS SPEAKER AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. -
Page 2: Dear Jensen® Customer
The serial number of this product is found on its back cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: SMPS-640 Serial Number: COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. -
Page 3: Protect Your Furniture
'feet' before you place the product on fine wooden furniture. PRODUCT FEATURES The SMPS-640 is a Bluetooth portable speaker with the following features: • Wireless playback of music from your Bluetooth enabled device via the Bluetooth connection. -
Page 4: Charging Instructions
Plug the one end of USB cable (included) into a USB port on your computer or into a USB power adaptor (not included), plug another end of cable to Charging Jack on the back of the SMPS-640. The Power indicator will be red while charging in the power OFF mode. When the red light turns off, the unit is fully charged. -
Page 5: Operating The Unit
TVs or video monitors. To avoid this, you may need to move the unit further away from the TV or monitor if an unnatural color shifts or image distortion occurs. TURNING THE SMPS-640 POWER ON/OFF 1.) In power OFF mode, Press and hold the Power Button about 3 seconds to turn the unit ON. - Page 6 3. If you are pairing (linking) your computer to the unit using Bluetooth, you may need to set the speaker as your computer’s default sound device. 4. If the SMPS-640 is left idle for about 3 minutes without linking to any Bluetooth enabled device, it will automatically turn off to save battery power.
-
Page 7: Care And Maintenance
Bluetooth devices turned on. You can re-link them by: 1. Turning off the SMPS-640 and then turning it on again to re-link your cell phone. 2. You can also re-link the speaker by using Bluetooth operation of your cell phone. -
Page 8: Specifications
Make sure your computer power is turned on functioning. and try another USB port. The SMPS-640 battery is Recharge the SMPS-640 battery. dead. The SMPS-640 is not linked Go through “Operating the Unit” process to with the Bluetooth enabled link the speaker. No Sound device. - Page 9 descriptions and warnings covered within the user manual or non-SPECTRA approved modifications. Claims are made within the warranty period. 2. This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with electrical codes or SPECTRA user manual specifications, or failure to provide reasonable care and necessary maintenance as outlined in the user manual.
Need help?
Do you have a question about the SMPS-640 and is the answer not in the manual?
Questions and answers