Related Manuals for Jensen SMPS-1000
Summary of Contents for Jensen SMPS-1000
-
Page 1: User Manual
BLUETOOTH STEREO SPEAKER WITH FM RADIO USER MANUAL SMPS-1000 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. -
Page 2: Dear Jensen® Customer
The serial number of this product is found on its back cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: SMPS-1000 Serial Number: ____________________... -
Page 3: Do Not Open
WARNINGS WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. CAUTION DO NOT OPEN CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE... - Page 4 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Minimum distances 2 cm around the apparatus for sufficient ventilation. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
-
Page 5: Compliance With Fcc Regulations
IMPORTANT NOTES Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. • Places subject to constant vibration. • Dusty, humid or moist places. CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT. FULLY INSERT THE PLUG TO MAIN POWER SOCKET. -
Page 6: Main Unit
LOCATION OF CONTROLS MAIN UNIT 3 4 5 6 1. BLUETOOTH INDICATOR 2. POWER ON/STANDBY BUTTON 3. VOLUME- BUTTON 4. VOLUME+ BUTTON 5. TUNING/SKIP DOWN BUTTON 6. TUNING/SKIP UP BUTTON 7. BLUETOOTH PAIR/PLAY/PAUSE BUTTON 8. SOURCE BUTTON 9. LCD DISPLAY 10. -
Page 7: Remote Control
15. VOLUME +/- BUTTONS GETTING STARTED CONNECTING THE SMPS-1000 TO EXTERNAL AUDIO DEVICES You can connect the SMPS-1000 audio input to the audio output of your television or VCR. Please see figure below. NOTE: 1. Make sure that the power is turned off when connecting or disconnecting the other... -
Page 8: Connecting The Ac Power Cord
2. This unit is not magnetically shielded and may cause color distortion on the screen of some TVs or video monitors. To avoid this, you may need to move the unit further away from the TV or monitor if unnatural color shifts or image distortion occurs. CONNECTING THE AC POWER CORD After connecting the speakers fully unwind the AC power cord and connect it to any convenient household 120V~ 60Hz AC outlet. -
Page 9: Listening To The Fm Radio
CLOCK SETTING (Using the remote control) After plugging in the AC power cord, “12:00” will appear and start flashing on the LCD display. In unit standby mode, 1. Press and hold the CLOCK button on the remote control until "CLK" shows on the display, the hour digits blinking. -
Page 10: Preset Radio Stations
FM & FM-STEREO RECEPTION Press the on the remote control to switch between FM FM MONO/STEREO button STEREO and FM MONO modes. Set the FM reception to “MONO”, stations will be received in MONO mode. When an FM station is weak or distorted, listening is usually improved by switching the FM reception to MONO mode. -
Page 11: Bluetooth Operation
2. Turn on the Bluetooth feature of your cell phone and enable the search or scan feature to find the SMPS-1000. 3. Select "SMPS-1000" from the device list when it appears on your device screen. If required, enter the pass code “0000” to pair (link) the SMPS-1000 with your cell phone. - Page 12 1.5 minutes for linking. 2. Select SMPS-1000 on your cell phone for linking. Bluetooth indicator will turn to solid blue if the SMPS-1000 and your cell phone have been re-linked successfully. 3. You can also re-link the SMPS-1000 by using Bluetooth operation of your cell phone.
-
Page 13: Auxiliary Input
NOTE: If you press the SLEEP button once and the “SLEEP “ indicator appears on the LCD display, the unit will go into Standby mode automatically after selected time has expired. If you are falling asleep to music from an external device connected to AUX input, the sleep timer will shut off the power to this unit but it will not turn off power to the external device. -
Page 14: Care And Maintenance
NOTE: If you connect this unit to the Line-Out Jack of your external device then you only need to adjust the volume control of this unit. If you connected the Headphone Jack of your external device then you may need to adjust both the volume control of your external device and the volume control of this unit to find the most desirable volume setting. -
Page 15: Troubleshooting Guide
a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes, as these will damage the finish of your unit. CAUTION: Never allow any water or other liquids to get inside the unit while cleaning. TROUBLESHOOTING GUIDE Should you experience difficulties in the use of this player please refer to the following chart or call 1-800-777-5331 for Product Service and Support. -
Page 16: Specification
SPECIFICATION Power requirement: Main Unit AC 120V~ 60Hz Power Consumption 40 W Remote Control 1 X DC 3V CR2025 lithium Battery Frequency Range Radio Band FM 87.5 ~ 108 MHz At Spectra, environmental and social responsibility is a core value of our business. We are dedicated to continuous implementation of responsible initiatives with an aim to conserve and maintain the environment through responsible recycling. - Page 17 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A.