Bluetooth Operation - Jensen jsbw-650 User Manual

HINTS FOR BEST RECEPTION:
To obtain the best FM/FM Stereo reception, unwrap and fully extend the FM
Antenna and adjust the position of the wire for best station reception
NOTE: Automatic tuning depends on the signal strength of the broadcasting station, so
weak stations may be skipped. You can manually tune to find the weak stations
if a station gets skipped. With strong signals, the tuner may stop before it
reaches the actual broadcast frequency, so you may need to manually tune for
the best reception.
PAIRING (LINKING) A BLUETOOTH ENABLED CELL PHONE OR OTHER
BLUETOOTH ENABLED DEVICE to the JSBW-650
1. With the power on, press the SOURCE button on remote control or tap the
/SOURCE button on main unit repeatedly to select Bluetooth mode. The Mode
Indicator LED turns blue and will be flashing. The JSBW-650 is now ready to pair
(link) with your Bluetooth device.
2. Turn on the Bluetooth feature of your cell phone and enable the search or scan
feature to find the JSBW-650.
3. Select "JSBW-650" from the device list when it appears on your device screen. If
required, enter the pass code "0000" to pair (link) the JSBW-650 with your cell
phone.
4. After successfully pairing (linking) your cell phone with the JSBW-650, the Mode
Indicator LED stops flashing and remains lit blue. You can now play music from
your cell phone or Bluetooth device wirelessly to the JSBW-650.
Note: If you want to connect the JSBW-650 to another cell phone after pairing
successfully, then you need to turn off the Bluetooth on the paired cell phone
first if it is in range before going through the above steps. Otherwise, the
JSBW-650 will automatically reconnect to the previously linked cell phone or
device.
5. Press the VOLUME +/- button
6. To turn off the JSBW-650 Bluetooth, press the
control or press and hold the
standby mode. Mode Indicator LED turns red. Don't forget to also turn off the
Bluetooth feature on your cell phone or Bluetooth device.
Notes:
1.) Refer to manual of your cell phone or other Bluetooth enabled device for
Bluetooth operation, since it may vary from model to model.

BLUETOOTH OPERATION

to adjust the desired volume level.
/SOURCE button on main unit to turn the unit to
10
POWER button on remote