Refill Indicators; Brightness; Contrast; Filter Check - Miele PG 8080i Operating Instructions Manual

Settings menu

Refill indicators

You can switch off the refill indicators
to replenish salt and rinse aid so that
the dishwasher will go into Standby
despite a lack of salt or rinse aid.
You cannot switch off fault
messages.
If you want the dishwasher to switch to
Standby mode in spite of the refill
indicators, you can switch both
indicator lights off.
 Select the desired setting and press
the center button to confirm.

Brightness

There are seven different display
brightness settings.
 Select the level of brightness you
want and press the center button to
confirm.

Contrast

There are seven different display
contrast settings.
 Select the contrast you want, and
press the center button to confirm.
50

Filter check

You can adjust the interval at which the
message to remind you to check the
filters appears.
You can set an interval between 30 and
60 program cycles.
The "Check filters" message is set at
the factory to appear after every 50
program cycles.
This function can be deactivated if
wished.
 Select the desired setting and press
the center button to confirm.