End Of Program; Switching Off; Unloading The Dishwasher - Miele PG 8080i Operating Instructions Manual

Operation

End of program

The program has finished when 
or AutoOpen appears in the display and
the door has opened slightly (if
applicable).
If "Extra Drying" was selected and
is active, the drying fan will
AutoOpen
run for a few minutes after the
program has ended.
 Open the door completely to re-
engage the door closing mechanism.
You can now empty the dishwasher.

If you have deactivated the
automatic door opening function (see
"Settings menu,
would still like to open the door at
the end of the program, then make
sure that you open the door fully.
Otherwise steam from the
dishwasher could damage the edge
of the counter because the fan is no
longer running.
40
AutoOpen "), but

Switching off

End At the end of a program:
 Turn the dishwasher off with the 
button.
The dishwasher will continue to use
electricity until it is switched off with
the  button.
Tip: If the dishwasher is not going to be
used for a longer period of time, e.g.,
while on vacation, the water supply
should be turned off.

Unloading the dishwasher

Dishes tend to break and chip more
easily when they are hot. Allow the
dishes to cool until they are cool
enough to handle before unloading
them.
The dishes will cool much faster if you
open the door when the program has
ended.
Unload the lower basket first, then the
upper basket and then the cutlery tray
(depending on model).
This will prevent water from the upper
basket and cutlery tray from dripping
onto dishes in the lower basket.