Switching On The Appliance; Selecting A Program; Starting A Program - Miele PG 8080i Operating Instructions Manual

Operation

Switching on the appliance

 Turn on the water supply if it is turned
off.
 Make sure the spray arms are not
obstructed.
 Close the door.
 Switch the dishwasher on with the 
button.
The factory-set Normal program will
appear in the display and the matching
indicator light will come on.
After a short while, the estimated
program duration for the selected
program will appear in the display.
You can also change the setting to the
program you last used (see "Settings
menu, Program selection").

Selecting a program

Choose your program according to the
type of load and how dirty it is.
The different programs and their uses
are described in the Program chart
later on in this booklet.
 Select the program required with the
 button.
The indicator light for the selected
program comes on and the indicator
light of the Start/Stop button flashes.
38
When the indicator light next to the 
symbol lights up, you can select further
programs using the > button. The
further programs are shown in the
display between the alternating
program names and duration.
You can now select additional
functions (see "Additional functions").

Starting a program

 Press the Start/Stop button.
The program starts.
If any additional functions are selected,
the appropriate indicator lights will also
light up.
A program should only be cancelled
in the first few minutes, if at all.
Important program stages (e.g.
reactivating the water softener) could
otherwise be omitted.