Network Configuration; Tcp/Ip - Digital Watchdog DWC-MTT4Wi36 User Manual

video image will change so greatly that the algorithm will stop working temporarily.
2. Try not to enable intrusion detection when light changes greatly in the scene.
3. Try to install the camera at a certain angle of depression.
4. Adequate light and clear scenery are very important to intrusion detection.
5. Adjust the camera to make the detection area in the center of the video image. The
detected object should be in the detection area for about two seconds at least. Make
sure no obstructions are in the main crossing area. It is strongly recommended to make
the obstructions (like trees, bushes, flags, etc.) outside the detection area.
6. Please contact us for more detailed application scenarios.
Here we take some improper application scenarios for instance.

6.5 Network Configuration

6.5.1 TCP/IP

Go to Config Network TCP/IP interface as shown below. There are two ways for network
connection.
The camera's angle of
depression is not wide
enough; there are so many
trees in the scene. The above
mentioned environment is
too complex to detect the
intrusion.
The
depression is not wide
enough; the street lamps at
night
interference; the swaying
trees in a windy day lead to
random interference. All the
above mentioned factors
make the scene improper
for intrusion detection.
26
camera's angle of
lead to light