Digital Watchdog DWC-MTT4Wi36 User Manual page 17

1. Check "Enable Alarm" check box to activate motion based alarm, choose alarm
holding time and set alarm trigger options.
Trigger Email: If "Trigger Email" and "Attach Picture" checkbox is checked (email
address shall be set first in the Email configuration interface), the captured
pictures and triggered event will be sent into those addresses.
Trigger FTP: If "Trigger FTP" and "Attach Picture" checkbox is checked, the
captured pictures will be sent into FTP server address. Please refer to FTP
configuration chapter for more details.
2. Set motion detection area and sensitivity. Click "Area and Sensitivity" tab to go to the
interface as shown below.
Move the "Sensitivity" scroll bar to set the sensitivity.
Select "Add" and click "Draw" button and drag mouse to select the motion detection area;
Select "Erase" and drag the mouse to clear motion detection area.
After that, click "Save" to save the settings.
3. Set the schedule of the motion detection. Click "Schedule" tab to go to the interface
as shown below.
17