Alarm Server - Digital Watchdog DWC-MTT4Wi36 User Manual

Week schedule
Set the alarm time from Monday to Sunday for alarm every day in one week. The
lengthwise means one day of a week; the rank means 24 hours of a day. Green means
selected area. Blank means unselected area.
"Add": Add the schedule for a special day.
"Erase": Delete holiday schedule.
Day schedule
Set alarm time for alarm in some time of a special day, such as holiday.
Set a date at the "Date" box, click "Add" button to add that date to the list box on the right
side and then drag the scroll bar to set the schedule of that day.
Select a date in the list box on the right side, and click "Delete" to remove the schedule on
that day.
Click "Save" button to save the settings.
Note: Holiday schedule is prior to Week schedule.

6.3.2 Alarm Server

Go to Alarm Alarm Server interface as shown below.
You may input the alarm server address and port. When the alarm happens, the camera will
automatically transfer the alarm event to the alarm server. If the alarm server is not used,
there is no need for you to configure here.
18