Technical Data - Hilti SD 5000 Operating Instructions Manual

Bits
Bit
Bit

4. Technical data

Right of technical changes reserved.
NOTE
The power tool is available in various voltage ratings. Please refer to the type identification plate for details of
the power tool's voltage and power rating.
Power tool
Rated power input
Rated voltage / rated current
Mains frequency
Weight in accordance with EPTA
procedure 01/2003
Dimensions (L x W x H)
Rated speed under no load
Max. torque
Chuck
Claw coupling
Vibration-absorbing grips
Other information about the power tool
Speed control
Forward / reverse
Protection class as per EN
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure. The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working
period. An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070554 / 000 / 00
S B PH2 Dry
SQ
TX
SD 5000
710 W
Rated voltage 110 V: 6.9 A
Rated voltage 220 V: 3.4 A
Rated voltage 230 V: 3.3 A
Rated voltage 240 V: 3.1 A
50...60 Hz
1.5 kg
300 mm x 77 mm x 170 mm
0...5,000/min
9.50 Nm
Hex. socket "
DIN 3126 / ISO 1173
With "jet" action for quiet opera-
tion
x
Electronic, by way of the control switch
Switch with interlock to prevent switching while
running
Protection class II (double insulated) as per
EN 60745
SD 2500
710 W
Rated voltage 110 V: 6.9 A
Rated voltage 220 V: 3.4 A
Rated voltage 230 V: 3.3 A
Rated voltage 240 V: 3.1 A
50...60 Hz
1.6 kg
310 mm x 77 mm x 170 mm
0...2,500/min
19 Nm
Hex. socket "
DIN 3126 / ISO 1173
With "jet" action for quiet opera-
tion
x
en
19