Technical Data - Hilti SD 2500 Manual

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a hand-held mains-powered electric tool for use in drywall installation.
The power tool is designed for driving and removing screws in drywall installation work. Drywall screws with
a length of up to 55 mm and a diameter of up to 4.2 mm can be used.
Working with materials hazardous to health (e.g. asbestos) is not permissible.
3.3 Items supplied
Drywall screwdriver, operating instructions
You can find other system products approved for use with your product at your local Hilti Center or
online at: www.hilti.com.
4

Technical data

4.1 Technical data
Rated current input
Weight
Rated speed under no
load
Max. torque
Socket/bit drive
*2021357*
Printed: 22.10.2018 | Doc-Nr: PUB / 5135889 / 000 / 03
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
£
SD 4500
6.5 A
1.4 kg
(3.1 lb)
0 /min ... 4,500 /min
9.5 Nm
Hex socket / "
1
4
2021357
Bit holder
Chuck
Power tool / accessory interface (snap-on
connection)
Coupling system / gearing
Belt hook
Motor
Air intake
Forward/reverse switch
Lockbutton for continuous operation
On / off switch
Supply cord
Type identification plate
Air exit
Depth gauge
SD 2500
3.3 A
1.5 kg
(3.3 lb)
0 /min ... 2,500 /min
19 Nm
Hex socket / "
1
4
English 5