Charging The Transmitter Battery - UBSAN ZINO MINI PRO User Manual

S/N Key / Switch
Custom keys
10
Charging /
11
Adapter Port
Low Battery
12
Warning
Standby
13
Protection

2.3 Charging The Transmitter Battery

The remote is charged using the Micro USB cable as shown:
Function
Long press the Fn+ wheel to adjust the zoom function.
Press and hold the Photo+ wheel to adjust the brightness
of the remote control screen.
The remote control buzzer beeps when a low battery is
triggered or Return to home is activated. Press the Fn
button for 1.5 seconds, to stop beeping prompts.
Long press the Fn button again 1.5 seconds to restart the
beeping prompts.
Custom keys, set the function on the APP and save it when
the APP is not connected, [short press] Fn won't work.
Function one: Exit the current flight mode.
In this mode, short press Fn to exit the current flight mode
and the aircraft will hover.
Function two: short press Fn to execute gimbal return to
normal state.
Function three: no function (factory default function)
Charge the remote control or connect with a mobile device
Low battery warning for the aircraft or remote control:
Remote control "Beeps" once every second.
If Remote controller is left on and unused, it will start
beeping once every 3 seconds and switch to stand by
mode. After 3 minutes of beeping, remote control will
automatically shut down
9
The remote control charging time
i s a b o u t 2 . 5 h o u r s . T h e r e m o t e
control battery indicator light flashes
during charging. When charging is
c o m p l e t e , t h e L E D s w i l l s t a y o n
s o l i d . T h e u s e t i m e a f t e r f u l l y
charged is about 1.5 hours.