Addition Of Spdl Tag To A Move Instruction - YASKAWA DX100 Instructions Manual

DX100
5.3
5 Registration of Instruction
5.3

Addition of SPDL Tag to a Move Instruction

Addition of SPDL Tag to a Move Instruction
When in the job content display in teach mode, add an SPDL tag to a
move instruction, with the cursor in the instruction area.
1. Select the line of the move instruction where the SPDL tag is to be
added.
– The move instruction appears in the input buffer line.
2. Press [SELECT]
– The detail edit window appears.
(1) With the cursor on "UNUSED" for the "POS LEVEL", press
[SELECT].
– The selection dialog box appears with the choice, "SPDL=".
(2) After adding "SPDL=" to the move instruction, press [ENTER].
– The detail edit window closes, and the job content window
reappears.
3. Press [INSERT] and [ENTER]
– The instruction displayed in the input buffer line is registered.
5-4
HW0482946
HW0482946
23/30