Panasonic KV-S1025C SERIES Service Manual page 74

Test Item
Lamp ON/ OFF 1. While pushing "START/STOP Button" on the
*2
4.
front panel, turn on the scanner.
2. Release the button at the time when the
LEDs change to the contents in the right
column. (LED (Red): ON / LED (Green): ON)
3. Push the "START/STOP Button" once to
turn on the Lamp (F).
4. Push the "START/STOP Button" once to
turn on the Lamp (B), and to turn off the
Lamp (F).
5. Push the "START/STOP Button" once to
turn on the Lamp (F) and Lamp (B).
6. Push the "START/STOP Button" once to
turn off the Lamp (F) and Lamp (B).
7. Turn off the scanner to finish the test.
*2
Note :
Every time you push the "START/STOP Button", Lamp ON/OFF status will change periodically, as follows.
(1) In case of KV-S1025C Series
Lamp (F) OFF / Lamp (B) OFF → Lamp (F) ON / Lamp (B) OFF → Lamp (F) OFF / Lamp (B) ON
→ Lamp (F) ON / Lamp (B) ON → Lamp (F) OFF / Lamp (B) OFF →.......
(2) In case of KV-S1020C Series
Lamp (F) OFF → Lamp (F) ON → Lamp (F) OFF → .......
Operation
74
LED Status
*1 *1
LED LED
(Red) (Green)
— —
ON ON
ON ON
ON ON
ON ON
ON ON
— —
Remarks