Panasonic KV-S1025C SERIES Service Manual page 70

Item
CCD Level 1. Click "CCD Level" on the main menu.
2. Push the Door Open Button to open the ADF Door.
And hold a sheet of clean white paper (A4 (80g/m
(20lb.)) between the Scanning Glasses (F)&(B), and then
close the ADF Door.
3. Set "Gain" values of each color on the "CCD Level" dialog
box.
4. Click "START" on the "CCD Level" dialog box to start CCD
Level Test.
5. Check whether the peak level is within the specification.
(See Remarks.)
6. Click "STOP" to finish this test.
7. Click "Close" to get back to the main menu.
8. Open the ADF Door, and then remove the paper.
Memory 1. Click "Memory" on the main menu.
2. Click "START" on "Memory" dialog box to start Memory
Read / Writer Test.
3. Check the result.
4. Click "Close" to get back to the main menu.
Operation
70
Default
—
2
) or Letter
—
Remarks
For Error Code details, refer
to Sec. 9.3.2.