9.3.7.
Adjust
Item
Shading
1. Click "Shading" on the main menu to execute shading
correction.
2. Clean the conveyor, rollers, and scanning area (glass,
reference area) according to the message on the display.
And click "OK".
3. Set the Shading Sheet (Part No.: See 14.3.) on the Feed
Tray in the portrait orientation.
And click "OK" to start the shading correction.
4. Confirm the result.
5. Click "OK" to get back to the main menu.
All Position
1. Set 2 pcs of Test Chart A4 (Part No.: See 14.3.) on the Feed
Tray in the portrait orientation.
2. Click "All Position" on the main menu to execute the
scanning position, length, width, and paper-end adjustment.
3. Check the result.
4. Click "OK" to get back to the main menu.
Operation
71
Default
Remarks
—
—
Set 2 pcs of Test Chart A4 in
the following order.
st
1
page: Position the chart
faced down.
nd
2
page (KV-S1025C Series
Only): Position the chart
faced up.