Panasonic KV-S1025C SERIES Service Manual page 61

Circuit Board or Part
Others
(When assembling or
disassembling parts
which will affect the
scanning positions)
Note: *1
When All Position is done, the setting values except for the value set in the Individual Position will
be also renewed.
Action
Code
A 1. Adjust the following adjustment, or adjust All Position.
a. Adjust Front Vertical Position in Individual Position.
b. Adjust Front Horizontal Position in Individual Position.
c. Adjust Back Vertical Position in Individual Position.
d. Adjust Back Horizontal Position in Individual Position.
61
Required Adjustment Remarks
*1