SEC TIONS
Table of Contents
TROUBlESHOOTING
fUSB
fUSB is not working (two channels)
• Check that computer USB and video cables are not crossed i.e. computer
#1 video is connected to channel #1 while USB device is connected to
channel #2.
Problem: fUSB is not working (all channels)
• Check that the USB device is properly connected to product console.
• Check that the fUSB status lED is steady green. If fUSB status lED is not
illuminated at all the device is not recognized by the product. If fUSB
status lED is flashing green device is rejected or non-qualified for security
reasons. To resolve please contact your system administrator.
fUSB is not working (one channel only)
• Check that device is working properly when connected directly to
computer.
• Check that there is a USB cable connected between the computer and the
relevant fUSB input port on product.
HSL SC44HU-3 Secure KVM Combiner
1
2
3
4
5
6
42