Table of Contents
Advertisement
SEC TIONS
Table of Contents
OPERaTION
System Mode
The mouse +/- side buttons triggers cyclic toggling between modes. System
mode can be easily identified by the appearance of the task bar at the bottom
of the display.
The combiner system mode enables the user to manage his/her combined
desktop and customize it for the job being done. This mode also enables the
user to move between windows and to minimize/ maximize windows as needed.
When the KVM Combiner is in System Mode:
• Mouse cursor is controlled by the system mouse.
• Mouse cursor is generated / controlled by the KVM Combiner.
• Mouse movement is unlimited in all display area.
• Keyboard is routed to the active window (active window is always in front).
• audio output is routed to the active window.
• Title bar / task bar visible and buttons are accessible.
• Pressing + / - mouse buttons will change to User mode and the active
window will be the window where the system cursor was last positioned.
• left clicking on a window will bring it to the front and make it the active
window.
• Pressing left mouse button and holding – will drag the window under it.
• Double clicking on a window will maximize that window to full screen.
• Right click on the bottom right corner of a window and dragging will allow
changing the window size (limited by the size set under the channel menu).
• Pressing both right and left keys on an active window will allow moving
the picture inside the window (only applicable of the source resolution is
larger the window size).
HSL SC44HU-3 Secure KVM Combiner
1
2
Change of Active Window
When in system mode there is always one window which is considered as the
active window. The active window top left corner will be marked in white (as
appose to black in all other windows) and its icon on the task bar will show as
pressed.
active Window is the window which the keyboard, audio and fUSB device
mapped to. In User mode the mouse will also be mapped to this window.
Switching between active windows (when in system mode) is simply done by
right clicking on another window with the mouse curser. another option is
pushing the front panel push buttons.
another option to switch between active windows in system mode is by using
the wheel in the mouse. Windows will move to the front at a cyclic sequence.
Moving Between User mode and System mode
• Pressing the +/- side buttons of the mouse
• CTRL, CTRL, u to move to User mode
• CTRL, CTRL, o to move to system mode
3
4
5
6
31
Advertisement
Table of Contents
