Table of Contents
Advertisement
SEC TIONS
Table of Contents
INSTallaTION
Step 2 – Connecting the Computers
• Using USB cables, connect each computer to the USB type B port in
"computer interface ports" area on product.
• If computer uses audio output, e.g. speakers/headphones, connect audio
cable from its audio output port to the corresponding audio input port
on product.
• If the computer uses a smart card reader/USB device, connect a USB cable
between the fUSB-enabled computer and the corresponding fUSB port
on product.
Note:
1. If the number of product channels is larger than the number of sources
used, make sure the computers are connected in a row starting from
computer #1. for example, if there are 3 channels used, connect computers
to channels #1, #2 and then #3.
2. The USB cable must be connected directly to a free USB port on the
computer, with no USB hubs or other devices in between.
Step 3 – Power up
• Connect aC power cord.
• Power up user display/s. Select through display setup menu the
appropriate video input if applicable.
• Power up the connected computers.
• Power up the product.
HSL SC44HU-3 Secure KVM Combiner
1
2
When you power up your computers, the product emulates display, mouse
and keyboard on each port and allows your computers to boot normally. You
should be able to move the mouse cursor on the primary display connected to
computer #1.
Check to see that the keyboard and mouse are working properly on each
computer.
Repeat this check with all occupied ports to verify that all computers are
connected and responding correctly.
If you encounter an error, check your cable connections for that computer and
reboot. If the problem persists, please refer to the Troubleshooting section in
this User Manual.
Step 4 – fUSB Installation (applicable models)
In case computer and product support fUSB functionality, such as user
authentication smart card reader, do the following:
1. Connect USB device, such as smart card reader, to fUSB port on product
console
2. Connect fUSB input port on product to any free USB port on computer
using a USB cable.
Note: Do not connect the USB cable if fUSB functionality is not needed for
that computer.
3
4
5
6
20
Advertisement
Table of Contents
