Feature Codes For Ibm Full Disk Encryption Disk Drive Sets; Disk Enclosure Feature Code - IBM DS8800 Introduction And Planning Manual

Feature codes for disk enclosures
Use disk enclosure feature codes to order the disk enclosures for your storage unit.
Table 18 describes the feature codes.
96
Introduction and Planning Guide
Table 17. Feature codes for IBM Full Disk Encryption disk drive sets
Feature Size and description (see
Code Notes)
5116 300 GB FDE Drive Set
5216 450 GB FDE Drive Set
5108 146 GB FDE Drive Set
5308 300 GB FDE Drive Set
5608 450 GB FDE Drive Set
5708 600 GB FDE Drive Set
5758 900 GB FDE Drive Set
5858 3 TB FDE Half Drive Set
6156 400 GB SSD FDE Half Drive
Set
6158 400 GB SSD FDE Drive Set
Note:
v Factory orders only. An intermix of encryption and nonencryption disk drives is not
supported.
v Base model 941 requires that you install a minimum of one regular disk drive feature on
each image. Because Model 941 has only one image, it requires one regular disk drive
feature per machine.
Table 18. Disk enclosure feature code
Feature Code
1210
1241
1242
1243
1244
1245
Disk speed in RPM
(K = 1000)
15K
15K
15K
15K
10K
10K
10K
7.2K
n/a
n/a
Description
Disk enclosure pair
Disk enclosure pair
Note: The disk enclosure
feature contains two disk
enclosure filler features in the
disk enclosure. The enclosure
pair supports the installation
of one to three disk features.
Any disk enclosure filler
must be removed when
regular disk drive or Standby
CoD disk drive set features
are added to the model.
HD STD enclosure indicator
HD SSD enclosure indicator
3.5" disk drive enclosure
indicator
HD SSD enclosure indicator
for 400 GB disk drives
DS8000 Models
941 and 94E
951 and 95E
Models
941 and 94E
951 and 95E