Management Console External Power Cord; Management Console Feature Codes - IBM DS8800 Introduction And Planning Manual

An external management console is available as an optional feature and as a
redundant management console for environments with high-availability
requirements. If you use Copy Services, a redundant management console
configuration is especially important.
The internal management console is included with every primary base model and
is mounted in a pull-out tray for convenience and security. The external
management console must be installed in an external 19-inch system rack. This
rack can be an IBM rack or a non-IBM rack. The rack must conform to the required
specifications. When you order an external management console, the hardware that
you require to install the management console into the rack is included with it.
Tip: To ensure that your IBM service representative can quickly and easily access
Notes:
Feature codes for internal and external management consoles
Use the management console feature codes to order up to two management
consoles for each storage unit.
Table 12 lists the management console feature codes.

Management console external power cord

If using an external management console, you must select an external power cord
that is specific to your country, voltage, and amperage needs.
The power cord supplies external power to the external management console.
Feature codes for management console external power cords
Use the management console external power cord feature codes to specify a power
cord when using an external management console.
Table 13 on page 93 lists the external power cord feature codes.
92
Introduction and Planning Guide
an external management console, place the external management console rack
within 15.2 m (50 ft) of the storage units that are connected to it.
1. To help preserve console function, the external and the internal
management console units are unavailable as a general-purpose
computing resource.
2. The external management console satisfies all applicable requirements
of Section 508 of the Rehabilitation Act, as long as assistive technology
properly inter-operates with it.
Table 12. Management console feature codes
Feature Description
Code
1120 Management Console - English laptop
internal
1130 Management Console - English laptop
external
Comments
To be installed in an internal IBM
rack. (Model 941 or 951.)
To be installed in an external IBM
or a non-IBM rack. (Model 941 or
951).