Feature Codes For Flashcopy Se; Point-In-Time Copy (Ptc) Feature Codes; Flashcopy Se Feature Codes - IBM DS8800 Introduction And Planning Manual

Table 42. Point-in-time copy (PTC) feature codes
Feature code
7250
7251
7252
7253
7254
7255
7260

Feature codes for FlashCopy SE

When you order FlashCopy SE function, you specify the feature code that
represents the physical capacity you want to authorize for the function.
The FlashCopy SE license feature codes enable the use of the FlashCopy SE
licensed function.
Note: If you are activating features for any of the licensed functions, such as Copy
Services, all the features must have the same capacity, including the
operating environment license feature.
You can combine feature codes to order the exact capacity that you need.
Note: If you have an active FlashCopy SE feature and replace it with an inactive
feature, "Managing a licensed feature" on page 187 provides information for
future use of this feature.
Table 43 provides the feature codes for the FlashCopy SE function.
Note: If you have an active FlashCopy SE feature and replace it with an inactive
feature, see "Managing a licensed feature" on page 187 for information
about using the feature again.
Table 43. FlashCopy SE feature codes
Feature code
7350
7351
7352
7353
7354
7355
7360
Description
PTC - Inactive
PTC - 1 TB unit
PTC - 5 TB unit
PTC - 10 TB unit
PTC - 25 TB unit
PTC - 50 TB unit
PTC - 100 TB unit
Description
SE - Inactive
SE - 1 TB unit
SE - 5 TB unit
SE - 10 TB unit
SE - 25 TB unit
SE - 50 TB unit
SE - 100 TB unit
Hardware models
941 , 951
Hardware models
941, 951
Chapter 5. Use of licensed functions
131