Email Notification Work Sheet; Snmp Trap Notification Work Sheet - IBM DS8800 Introduction And Planning Manual

System storage
Table of Contents

Advertisement

Email notification work sheet

This work sheet allows you to specify the setting for email notifications.
The email notification work sheet allows you to specify whether you want to
receive email notifications when a management console encounters serviceable
events.
Restriction: To receive email notifications, the management console must be
Work sheet purpose
IBM service representatives use the information on this work sheet to customize
your storage system for email notifications. If you choose to use email
notifications, the notification settings are customized so that the specified people in
your organization receive emails when there is general or error information to send
about the storage complex.
Work sheet and instructions
You must complete Table 76 on page 213 for all installations that include a
management console.
Notes:
212
Introduction and Planning Guide
Table 75. SNMP trap notification work sheet
Item or Setting
Instructions
Enable SNMP
Check Yes to allow the storage unit to
trap
generate and send SNMP trap
notifications?
notifications when the system
encounters problems. Check No if you
do not want the storage unit to send
SNMP trap notifications. If you check
No, you have completed this work
sheet.
SNMP trap notification settings: Complete the following section if you checked Yes to
enable SNMP trap notifications. Do not use the IP address that is shown in the example in
this work sheet. The IP address is only an example and does not function. Your IBM
service representative can provide the correct IP address.
SNMP trap
Provide the dotted decimal addresses
destinations
and community name of the
destinations that are to receive SNMP
traps (for example, 9.127.152.254
default).
Note: If you plan to use advanced functions SNMP messaging, you must set those
functions using DS CLI.
connected to your LAN.
1. Bold options in the MC1 and MC2 columns indicate default settings.
2. Management console is abbreviated as MC in the following table.
MC2 (if
MC1
applicable)
_ Yes
_ Yes
_ No
_ No

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds8700

Table of Contents